Measure yourself...
Because all sales are final
If you message me on sizing pre-sale and we get it wrong I'll make it right.
​
If you message me saying you think you got the wrong size my first question is going to be: When you measured yourself what did you come up with? I'll see all of our previous conversations and your order because you will use the same name and email for communication and ordering. using the chat feature on the contact me page is the best option.
​​​​
​​
​
​
​
​
​
​
-
vernier calipers I have a set for $1 plus shipping here: 80mm-calipers i'll knock the cost of the calipers and shipping off your order.
-
cloth sewing tape measure.
-
using a camera over a ruler is not an acceptable way to measure. parallax is the issue.
-
eyeballing is not acceptable unless you have a calibration certificate saying your eyes are accurate to within +/-.001mm.
If you are unsure of what size to get after measuring contact me
We are looking for the diameter of the glans at the widest part. if you use a cloth tape measure thats circumference we'll need to divide that by 3.14 to get diameter. example: 112/3.14=35.6measure when you are flaccid. grower/shower doesn't make a difference. if the wind blows and you gain 5mm doesn't make a difference either. flaccid only!! when you measure yourself you want the measuring device to just to touch you don't want it to compress the skin otherwise the measurement will be off,
​
​
CAR-1 and my tugger - You want to order a size that is +/- 2.5mm of what you got when you measured yourself. do not go down a size thinking it'll grip better it'll be uncomfortable. i was getting complaints about pinching most of pinching issues were because the wrong size was purchased (they sized down instead of staying within 2.5mm) that's why my printable tape says to go up.
frenulum notch is not necessary for their primary uses direct air and tugging. it may be an issue if you want to use them as a retainer. they sit higher on the glans so it might not interfere with the frenulum.
My retainer regular or notched is more forgiving on sizing but will stay on and be more comfortable going down a size. example: you measure yourself at 37mm get the 30mm retainer.
​
​
If you are unsure of what size to get after measuring contact me
